An attractive broadcast console or video production console that's configurable to fit any studio control or master control. We have many years experience designing broadcast control rooms, put us to work helping you!
A modular control room console system consisting of 1 bay (20 5/8” wide) modules with 6ru (10 ½”) above the work surface and 8ru (14”) under the work surface. Control room furniture needs good ventilation and access. The top has lift off ventilated access panels with cable pass through. Back edge of console has a rail used to mount monitor arms, speaker stands, custom monitor walls etc. Good cable management is a must for technical furniture. A space between console and work surface back edge allows cables from deck to enter the console at any point. Deck bay modules extend the deck to the back of the console and have 8ru (14") below work surface . Regular and deck only sections and 45 degree corner units allow enormous flexibility in the design of your console solution. See below for individual components.
We make it easy for you, If the pre-configured examples above don't work we will configure it for you just answer the following questions.
- How many bays do I need or how big is my space?
- Do I want any deck bays? These are full depth counter tops and are great for deep equipment. Do I need any 45 degree corner units? you need one on each side of a bay to make a 90 degree turn.
- If the control console backs are visible to operators or the public do I need rear doors? Do I need any equipment cut into the deck or a deeper deck to fit equipment?
|Logic System Modular Control Console Bay
A modular control room furniture system consisting of 1 bay wide (20 5/8”) bolt together modules with rack mounting rails.
|Logic System 45 degree corner
Use to make 45 degree turns in Logic System modular control room furniture.
|Logic system left end panel
Use to finish the left side of a console that ends with a regular bay.
|Logic System right end panel
Use to finish the right end of a console that ends with a regular bay
|Logic System Deck Bay 45
Use to make 45 degree turns in Logic System modular control room furniture. Used for deck only bays version.
|Logic System deck bay left end panel
Used to finish the left end of deck bays when the left side of the console ends on a deck only bay.
|Logic System modular control room furniture deck bay
Technical furniture requires accommodating large equipment such as audio consoles, switchers or just equipment control keyboards. Use a deck bays for switcher or audio positions and have great sig
|Logic System deck bay right end panel
Used to finished the right side of deck bays when the console ends on the right with a deck only bay.
|Logic System left transition division
Logic System transition division. Used when transitioning to a deck bay on the left hand side of a regular bay.
|Logic System back door for deck bays
Close off the back of your control room furniture with this door. Fits the deck only bay. Can be mounted as left or right hand.
|Logic System back door
Close off the back of your control room furniture with this door. Fits the regular bay. Can be mounted as left or right hand.
|Logic System Bay Right Transition Division
Logic System transition division. Used when transitioning to a deck bay on the right hand side of a regular bay.